Lower Burr Chamber (DF54 / DF64 Gen 2)

Replace a damaged or worn lower burr chamber in your DF Series coffee grinder.

This model-specific metal component forms the lower section of the grinding chamber and provides the mounting platform for the grinder’s lower burr assembly. It is intended as a replacement for an original chamber that has been damaged, deformed or is otherwise no longer suitable for continued use.

This is an internal repair component rather than a routine maintenance part or burr upgrade. Please confirm your grinder model and inspect the existing component before ordering.

Available Options

• DF54 Lower Burr Chamber
• DF64 Gen 2 Lower Burr Chamber

Features

• Model-specific replacement component
• Durable metal construction
• Designed to match the internal mounting layout of the selected grinder
• Provides the mounting platform for the lower burr assembly
• Suitable for replacing a damaged or unusable original chamber

Compatibility

Please select the option that matches your grinder. The DF54 and DF64 Gen 2 lower burr chambers are different components and are not interchangeable.

• The DF54 option is designed for the DF54 coffee grinder.
• The DF64 Gen 2 option is designed for the DF64 Gen 2 coffee grinder.
• Not compatible with the original DF64 Gen 1, DF64V, DF83, DF83V or other grinder models.

Production revisions can differ between grinder models and batches. If you are uncertain about compatibility, compare the replacement part with your existing chamber or contact Grind Logic with your grinder model and a clear photo of the original component before ordering.

What’s Included

• 1 × lower burr chamber for the selected grinder model

Please note: Burrs, motor, fasteners, wiring and other internal grinder components are not included unless expressly shown or stated.

Installation

Replacing the lower burr chamber requires internal disassembly of the grinder and should only be undertaken by someone experienced and comfortable working with coffee grinder components. Incorrect disassembly or reassembly may affect burr alignment, calibration or grinder operation.

Always switch the grinder off and disconnect it from the power supply before beginning any inspection or repair. Do not operate the grinder until it has been fully and correctly reassembled.

For general cleaning and preventative maintenance information, see the DF54 and DF64 Gen 2 care guide. You can also browse the complete range of DF Series grinder replacement parts.